Environmental requirements for sanitary garbage truck

 

What are the working environment requirements for Sanitary garbage truck? Let me introduce them below.

1. The weight of the garbage in the garbage compartment of the sanitary garbage truck should not exceed the rated load capacity of the car, otherwise, it will cause excessive pressure and damage the hydraulic parts when packing, and the lighter will cause oil leakage and the clutch wheel will slip.

2. Before the packing work, ensure that the longitudinal beams of the box body are located between the rollers at the rear of the sub-beam and that the longitudinal center axis of the vehicle coincides with the longitudinal center axis of the box body; otherwise, the vehicle position should be adjusted.

3. When the sanitary garbage truck is in the packing operation, the throttle can be appropriately increased according to the weight of the garbage collected in the carriage, and the garbage can be smoothly hooked to achieve the packing.

4. At the end of the operation, the electromagnetic clutch switch should be turned off in time to ensure that the electromagnetic clutch is in a power-off state. It is particularly reminded that the electromagnetic clutch must be in a power-off state when the car is off, otherwise it will cause a large amount of battery power consumption , Resulting in a loss of electricity and the car can not start normally.

5. Under normal circumstances, do not adjust the pressure of the pressure regulating valve, this is already adjusted before the car leaves the factory.